B4 Indicator (FREE) for NinjaTrader, Thinkorswim and TradingView

Chuck

Chuck

Moderator
Staff member
Platform
  1. Thinkorswim
  2. TradingView
  3. NinjaTrader
aAXhlpC.png


TradingView
Download here.

NinjaTrader
Download here.

Thinkorswim
Code: 
# B4 Indicator
#
# Free for use for non commercial. Header credits must be included when any form of the code included in this package is used.
# User assumes all risk. Author not responsible for errors or use of tool.
# Copyright (c) 2021 B4 Signals
#
# Get support at: https://b4signals.com
# Join us at: https://discord.gg/kD3pKE2CQd
#
#
# v3.0 - barbros / chuck - official release
# BETA - christoper84    - new squeeze logic
# v3.1 - barbaros        - squeeze integration, added squeeze dots, changed squeeze label text and color

declare lower;

input ShowMarketForecastLabel = yes;        #hint ShowMarketForecastLabel: Show the intermediate Market Forecast label
input ShowMACDBBLabel = yes;                #hint ShowMACDBBLabel: Show the MACDBB based Trend label
input ShowMACDBBCloud = no;                 #hint ShowMACDBBCloud: Show the MACDBB cloud shaded between BB
input ShowRSMCloud = no;                    #hint ShowRSMCloud: Show the vertical cloud based on RSM
input ShowHMALabel = yes;                   #hint ShowHMALabel: Show HUll Moving Average based Divergence label
input ShowSQZSqueezeLabel = yes;            #hint ShowSQZSqueezeLabel: Show Stochastic Scalper based squeeze label
input ShowSQZSqueezeCloud = yes;            #hint ShowSQZSqueezeCloud: Show Stochastic Scalper based squeeze cloud between BB
input ShowBullBearVerticalLines = yes;      #hint ShowBullBearVerticalLines: Show vertical lines for bullish or bearish direction

AddLabel(yes, "B4 Indicator", Color.WHITE);

### Market Forecast

def pIntermediate = MarketForecast().Intermediate;

AddLabel(ShowMarketForecastLabel,
    "Market Forecast " +
    if pIntermediate >= 80 then "Bullish" else
    if pIntermediate <= 20 then "Bearish" else
    if pIntermediate > pIntermediate[1] then "Rising" else
    if pIntermediate < pIntermediate[1] then "Falling" else "Neutral",
    if pIntermediate >= 80 then Color.DARK_GREEN else
    if pIntermediate <= 20 then Color.DARK_RED else
    if pIntermediate > pIntermediate[1] then Color.GREEN else
    if pIntermediate < pIntermediate[1] then Color.RED else Color.GRAY
);

### MACDBB

input MACDBB_FastLength = 12;
input MACDBB_SlowLength = 26;
input MACDBB_BandLength = 15;
input MACDBB_NumDev = 1.0;

def MACDBB_Data = MACD(fastLength = MACDBB_FastLength, slowLength = MACDBB_SlowLength, MACDLength = 5);

plot MACDBB_Upper = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
                                             Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).UpperBand;
MACDBB_Upper.SetDefaultColor(Color.RED);
MACDBB_Upper.HideTitle();
MACDBB_Upper.HideBubble();

plot MACDBB_Lower = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
                                             Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).Lowerband;
MACDBB_Lower.SetDefaultColor(Color.GREEN);
MACDBB_Lower.HideTitle();
MACDBB_Lower.HideBubble();

plot MACDBB_Midline = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
                                               Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).MidLine;
MACDBB_Midline.SetDefaultColor(Color.LIGHT_RED);
MACDBB_Midline.SetStyle(Curve.FIRM);
MACDBB_MidLine.HideTitle();
MACDBB_MidLine.HideBubble();

plot MACDBB_Line = MACDBB_Data;
MACDBB_Line.AssignValueColor(
    if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line >= MACDBB_Upper then Color.GREEN
    else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line >= MACDBB_Upper then Color.DARK_GREEN
    else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line <= MACDBB_Lower then Color.RED else
    if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line <= MACDBB_Lower then Color.DARK_RED
    else Color.GRAY
);
MACDBB_Line.SetLineWeight(1);

plot MACDBB_Dots = MACDBB_Data;
MACDBB_Dots.AssignValueColor(
    if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then Color.GREEN
    else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then Color.DARK_GREEN
    else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then Color.RED
    else if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then Color.DARK_RED
    else Color.GRAY
);
MACDBB_Dots.SetPaintingStrategy(PaintingStrategy.LINE_VS_POINTS);
MACDBB_Dots.SetLineWeight(1);
MACDBB_Dots.HideTitle();
MACDBB_Dots.HideBubble();

input MACDBB_CrossFromAboveAlert = {default "Zero", "Lower", "Middle", "Upper"};
input MACDBB_CrossFromBelowAlert = {default "Zero", "Lower", "Middle", "Upper"};

def MACDBB_CrossFromAboveVal = if MACDBB_CrossFromAboveAlert == MACDBB_CrossFromAboveAlert.Lower then MACDBB_Lower
                               else if MACDBB_CrossFromAboveAlert == MACDBB_CrossFromAboveAlert.Upper then MACDBB_Upper
                              else 0;
def MACDBB_CrossFromBelowVal = if MACDBB_CrossFromBelowAlert == MACDBB_CrossFromBelowAlert.Lower then MACDBB_Lower
                               else if MACDBB_CrossFromBelowAlert == MACDBB_CrossFromBelowAlert.Upper then MACDBB_Upper
                               else 0;

def MACDBB_Buy = MACDBB_Data > MACDBB_Upper;
def MACDBB_Sell = MACDBB_Data <= MACDBB_Lower;

AddLabel(ShowMACDBBLabel,
    "Trend " +
    if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then "Bullish"
    else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then "Bullish (reversing)"
    else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then "Bearish"
    else if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then "Bearish (reversing)"
    else "Neutral",
    if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then Color.GREEN
    else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then Color.DARK_GREEN
    else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then Color.RED
    else if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then Color.DARK_RED
    else Color.GRAY
);

AddCloud(if ShowMACDBBCloud then MACDBB_Upper else MACDBB_Lower, MACDBB_Lower, Color.LIGHT_RED);

### RSI/STOCASTIC/MACD CONFLUENCE COMBO

plot RSM_MACD_Diff = reference MACD("fast length" = 12, "slow length" = 26, "macd length" = 9).Diff;
RSM_MACD_Diff.SetDefaultColor(GetColor(5));
RSM_MACD_Diff.SetPaintingStrategy(PaintingStrategy.HISTOGRAM);
RSM_MACD_Diff.SetLineWeight(4);
RSM_MACD_Diff.DefineColor("Positive and Up", Color.GREEN);
RSM_MACD_Diff.DefineColor("Positive and Down", Color.DARK_GREEN);
RSM_MACD_Diff.DefineColor("Negative and Down", Color.RED);
RSM_MACD_Diff.DefineColor("Negative and Up", Color.DARK_RED);
RSM_MACD_Diff.AssignValueColor(
    if RSM_MACD_Diff >= 0 then
        if RSM_MACD_Diff > RSM_MACD_Diff[1] then RSM_MACD_Diff.Color("Positive and Up") else RSM_MACD_Diff.Color("Positive and Down")
    else
        if RSM_MACD_Diff < RSM_MACD_Diff[1] then RSM_MACD_Diff.Color("Negative and Down") else RSM_MACD_Diff.Color("Negative and Up")
);

plot RSM_MACD_ZeroLine = 0;
RSM_MACD_ZeroLine.SetDefaultColor(Color.DARK_GRAY);
RSM_MACD_ZeroLine.HideTitle();
RSM_MACD_ZeroLine.HideBubble();

def RSM_RSI = reference RSI(length = 7).RSI;

def RSM_Stoch_Val = 100 * (close - lowest(low, 14)) / (highest(high, 14) - lowest(low, 14));
def RSM_StochSlowK = SimpleMovingAvg(SimpleMovingAvg(RSM_Stoch_Val,3),3);

def RSM_rsiGreen = RSM_RSI >= 50;
def RSM_rsiRed = RSM_RSI < 50;
def RSM_stochGreen = RSM_StochSlowK >= 50;
def RSM_stochRed = RSM_StochSlowK < 50;
def RSM_macdGreen = RSM_MACD_Diff >= 0;
def RSM_macdRed = RSM_MACD_Diff < 0;
def RSM_Buy = RSM_rsiGreen and RSM_stochGreen and RSM_macdGreen;
def RSM_Sell = RSM_rsiRed and RSM_stochRed and RSM_macdRed;

# Shade areas based on criteria; adjust as needed

AddCloud(
    if ShowRSMCloud and RSM_rsiGreen and RSM_stochGreen and RSM_macdGreen then Double.POSITIVE_INFINITY else Double.NaN,
    if ShowRSMCloud and RSM_rsiGreen and RSM_stochGreen and RSM_macdGreen then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN
);
AddCloud(
    if ShowRSMCloud and RSM_rsiRed and RSM_stochRed and RSM_macdRed then Double.POSITIVE_INFINITY else Double.NaN,
    if ShowRSMCloud and RSM_rsiRed and RSM_stochRed and RSM_macdRed then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED
);

### Divergance

input HMA_Length = 55;
input HMA_Lookback = 2;

def HMA = HullMovingAvg(price = HL2, length = HMA_Length);
def HMA_delta = HMA[1] - HMA[HMA_Lookback + 1];
def HMA_delta_per_bar = HMA_delta / HMA_Lookback;
def HMA_next_bar = HMA[1] + HMA_delta_per_bar;
def HMA_concavity = if HMA > HMA_next_bar then 1 else -1;
def HMA_MA_Max = if HMA[-1] < HMA and HMA > HMA[1] then HMA else Double.NaN;
def HMA_MA_Min = if HMA[-1] > HMA and HMA < HMA[1] then HMA else Double.NaN;
def HMA_divergence = HMA - HMA_next_bar;

AddLabel(ShowHMALabel,
        "Divergence " +
        if HMA_concavity < 0 then
            if HMA_divergence[1] > HMA_divergence then "Bearish"
            else "Bearish (reversing)"
        else
            if HMA_divergence[1] < HMA_divergence then "Bullish"
            else "Bullish (reversing)",
        if HMA_concavity < 0 then
            if HMA_divergence[1] > HMA_divergence then Color.RED
            else Color.DARK_RED
        else
            if HMA_divergence[1] < HMA_divergence then Color.GREEN
            else Color.DARK_GREEN
);

### Squeeze

input SQZ_SqueezeLength = 30;

def SQZ_Bandwidth = MACDBB_Upper - MACDBB_Lower;
def SQZ_Squeeze_Low = Lowest(SQZ_Bandwidth, SQZ_SqueezeLength);
def SQZ_Squeeze = SQZ_Bandwidth == SQZ_Squeeze_Low;
def SQZ_squeeze_signal = !SQZ_squeeze[1] and SQZ_squeeze;

plot SQZ_Dot = if SQZ_Squeeze then 0 else Double.NaN;
SQZ_Dot.setPaintingStrategy(PaintingStrategy.POINTS);
SQZ_Dot.setLineWeight(2);
SQZ_Dot.setDefaultColor(color.WHITE);
SQZ_Dot.HideTitle();
SQZ_Dot.HideBubble();

AddCloud(if ShowSQZSqueezeCloud and SQZ_squeeze then MACDBB_Upper else Double.NaN,
         if ShowSQZSqueezeCloud and SQZ_squeeze then MACDBB_Lower else Double.NaN, Color.YELLOW);
AddLabel(ShowSQZSqueezeLabel, "Squeeze Alert", if SQZ_squeeze then Color.WHITE else Color.DARK_GRAY);

### RSI IFT

def RSI_IFT_R = reference RSI(5, close) - 50;
def RSI_IFT_AvgRSI = MovingAverage(AverageType.Exponential,RSI_IFT_R,9);
def RSI_IFT_InverseRSI = (Power(Double.E, 2 * RSI_IFT_AvgRSI) - 1) / (Power(Double.E, 2 * RSI_IFT_AvgRSI) + 1);
def RSI_IFT_Direction = if BarNumber() == 0 then 0
                        else if (RSI_IFT_InverseRSI[1] > 0) and (RSI_IFT_InverseRSI < 0) then -1
                        else if (RSI_IFT_InverseRSI > 0) and (RSI_IFT_InverseRSI[1] < 0) then 1
                        else RSI_IFT_Direction[1];

### Fibonacci SuperTrend

input FST_Length = 11;
input FST_Retrace = 23.6;
input FST_UseHighLow = yes;

def FST_h = if FST_UseHighLow then high else close;
def FST_l = if FST_UseHighLow then low else close;
def FST_minL = Lowest(FST_l, FST_Length);
def FST_maxH = Highest(FST_h, FST_Length);

def FST_hh = if FST_h > FST_maxH[1] then FST_h else FST_hh[1];
def FST_ll = if FST_l < FST_minL[1] then FST_l else FST_ll[1];
def FST_trend = if FST_h > FST_maxH[1] then 1 else if FST_l < FST_minL[1] then -1 else FST_trend[1];
def FST_Direction = if BarNumber() == 0 then 0
                    else if FST_trend != 1 then -1
                    else if FST_trend == 1 then 1
                    else FST_Direction[1];

### Bar Color

input BarColor = { "None", default "RSM", "FibonacciSuperTrend" };    #hint BarColor: Paint bars with RSM or Fibonacci SuperTrend direction

AssignPriceColor(
    if BarColor == BarColor.FibonacciSuperTrend then
        if FST_trend == 1 then Color.GREEN else Color.RED
    else if BarColor == BarColor.RSM then
        if RSM_Buy then Color.GREEN
        else if RSM_Sell then Color.RED
        else Color.DARK_GRAY
    else Color.CURRENT
);

### Strategy

input BullBear_Include_FST = yes;       #hint BullBear_Include_FST: Include Fibonacci SuperTrend in the vertical line strategy
input BullBear_Include_RSI_IFT = yes;   #hint BullBear_Include_RSI_IFT: Include RSI IFT in the vertical line strategy

def BullBear_Buy = (!BullBear_Include_FST or FST_Direction == 1) and
                   (!BullBear_Include_RSI_IFT or RSI_IFT_Direction == 1);
def BullBear_Sell = (!BullBear_Include_FST or FST_Direction == -1) and
                    (!BullBear_Include_RSI_IFT or RSI_IFT_Direction == -1);

AddVerticalLine(ShowBullBearVerticalLines and BullBear_Buy and !BullBear_Buy[1],
                AsDollars(close),
                Color.GREEN, Curve.SHORT_DASH);
AddVerticalLine(ShowBullBearVerticalLines and BullBear_Sell and !BullBear_Sell[1],
                AsDollars(close),
                Color.RED, Curve.SHORT_DASH);

def Strategy_Buy = BullBear_Buy and MACDBB_Buy and RSM_Buy;
def Strategy_Sell = BullBear_Sell and MACDBB_Sell and RSM_Sell;
def Strategy_BuySignal = Strategy_Buy and !Strategy_Buy[1];
def Strategy_SellSignal = Strategy_Sell and !Strategy_Sell[1];

plot BuyArrow = if Strategy_BuySignal then 0 else Double.NaN;
BuyArrow.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BuyArrow.SetDefaultColor(Color.WHITE);
BuyArrow.HideTitle();
BuyArrow.HideBubble();

plot SellArrow = if Strategy_SellSignal then 0 else Double.NaN;
SellArrow.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
SellArrow.SetDefaultColor(Color.WHITE);
SellArrow.HideTitle();
SellArrow.HideBubble();

### Alerts

Alert(Strategy_BuySignal, "Long Entry", Alert.BAR, Sound.DING);
Alert(Strategy_SellSignal, "Short Entry", Alert.BAR, Sound.DING);
Alert(MACDBB_Line crosses above MACDBB_CrossFromAboveVal, "MACDBB Crossed Up", Alert.BAR, Sound.DING);
Alert(MACDBB_Line crosses below MACDBB_CrossFromBelowVal, "MACDBB Crossed Down", Alert.BAR, Sound.DING);
Alert(SQZ_squeeze_signal, "Squeeze Alert", Alert.BAR, Sound.DING);

Comments are welcome. Let us know how you use it, how it works for your trades!


This is how I like to trade this indicator and it is not to be considered trading advise. Many people are asking how I use this indicator so I decided to explain how I personally like you use this. This info is for educational purposes only. This info will be updated to reflect each new version as it evolves:
  • I usually trade in the direction of the MACDBB middle line. The trend label is synced with that and will help keep you in the right direction.
  • I like to see confirmation with the Market Forecast and the trend label. I find a neutral trend is not my friend as it usually will chop me out of profit.
  • The MACDBB Cloud in the original version incorporated the use of Keltner Channel to determine a squeeze, the newer versions employ a new squeeze logic with squeeze dot and alert. A yellow (default) cloud will also appear on the bands when this condition is meet. Price has a tendency to breakout after a squeeze. This is where I like to be set up waiting for an entry. By default the cloud is turned off.
  • The bands when contracted show an area of consolidation or a point of equilibrium. These levels are often areas of supply and demand or support and resistance. When the band is tight and the MACDBB Dotted Line crosses over the top band It is typically a strong move to the up side, just the opposite in the inverse.
  • By default, the alerts crossing for the bands from both directions is set to zero. This tends to be a safer entry of exit point.
  • Some people may want to enter a position upon the MACDBB dotted Line crossing the bands Upper, Lower, Or Middle line. You will have to play with it and figure out what works best for you. The alerts from this will not give you an absolute top or absolute bottom. But serves as a good indication of price aggregation.
  • The RSM cloud in the background are a confluent combination of RSI, STOCASTIC and MACD. When the signals are confluent, they will either be Red or Green by default. When they are not in agreement it is likely you are in inflight turbulence or a change of investor sentiment. By default these are turned off.
  • For my first confirmation of a trade, I watch the MACDBB dots line. Before the line turns grey it should turn dark red or dark green. That’s when I am alerted, I use that as my lead while using this indicator.
  • When the MACDBB dots line turns gray, that is an area of indecision and as soon as that line crosses the MACDBB middle line, I look for secondary confirmation to confirm entry or exit, I do this on entries and exits.
  • For those looking to get a better exit on the RSI_IFT strategy, perhaps this will alert you.
  • Personally with my risk tolerance, I find that when the MACDBB dots line turns gray when I am in a long position and crosses over the upper band, I usually exit my position. I then wait for the pull back or a continuation. I find personally that the commission fee for exiting out ways the 100’s of dollars I risk or lose if the position changes direction at that time. I do the inverse for shorts.
Scanner
Code: 
# B4 Scanner
#
# Free for use for non commercial. Header credits must be included when any form of the code included in this package is used.
# User assumes all risk. Author not responsible for errors or use of tool.
# Copyright (c) 2021 B4 Signals
#
# Get support at: https://b4signals.com
# Join us at: https://discord.gg/kD3pKE2CQd
#
#
# v3.0 - barbros / chuck - official release
# v3.1 - barbros         - added squeeze option

### MACDBB

input MACDBB_FastLength = 12;
input MACDBB_SlowLength = 26;
input MACDBB_BandLength = 15;
input MACDBB_NumDev = 1.0;

def MACDBB_Data = MACD(fastLength = MACDBB_FastLength, slowLength = MACDBB_SlowLength, MACDLength = 5);
def MACDBB_Upper = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
                                             Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).UpperBand;;
def MACDBB_Lower = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
                                             Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).Lowerband;
def MACDBB_Buy = MACDBB_Data > MACDBB_Upper;
def MACDBB_Sell = MACDBB_Data <= MACDBB_Lower;

### RSI/STOCASTIC/MACD CONFLUENCE COMBO

def RSM_MACD_Diff = reference MACD(fastLength = 12, slowLength = 26, MACDLength = 9).Diff;
def RSM_MACD_ZeroLine = 0;
def RSM_RSI = reference RSI(length = 7).RSI;
def RSM_Stoch_Val = 100 * (close - lowest(low, 14)) / (highest(high, 14) - lowest(low, 14));
def RSM_StochSlowK = SimpleMovingAvg(SimpleMovingAvg(RSM_Stoch_Val,3),3);

def RSM_rsiGreen = RSM_RSI >= 50;
def RSM_rsiRed = RSM_RSI < 50;
def RSM_stochGreen = RSM_StochSlowK >= 50;
def RSM_stochRed = RSM_StochSlowK < 50;
def RSM_macdGreen = RSM_MACD_Diff >= 0;
def RSM_macdRed = RSM_MACD_Diff < 0;
def RSM_Buy = RSM_rsiGreen and RSM_stochGreen and RSM_macdGreen;
def RSM_Sell = RSM_rsiRed and RSM_stochRed and RSM_macdRed;

### Squeeze

input SQZ_SqueezeLength = 30;

def SQZ_Bandwidth = MACDBB_Upper - MACDBB_Lower;
def SQZ_Squeeze_Low = Lowest(SQZ_Bandwidth, SQZ_SqueezeLength);
def SQZ_Squeeze = SQZ_Bandwidth == SQZ_Squeeze_Low;

### RSI IFT

def RSI_IFT_R = reference RSI(5, close) - 50;
def RSI_IFT_AvgRSI = MovingAverage(AverageType.Exponential,RSI_IFT_R,9);
def RSI_IFT_InverseRSI = (Power(Double.E, 2 * RSI_IFT_AvgRSI) - 1) / (Power(Double.E, 2 * RSI_IFT_AvgRSI) + 1);
def RSI_IFT_Direction = if BarNumber() == 0 then 0
                        else if (RSI_IFT_InverseRSI[1] > 0) and (RSI_IFT_InverseRSI < 0) then -1
                        else if (RSI_IFT_InverseRSI > 0) and (RSI_IFT_InverseRSI[1] < 0) then 1
                        else RSI_IFT_Direction[1];

### Fibonacci SuperTrend

input FST_Length = 11;
input FST_Retrace = 23.6;
input FST_UseHighLow = yes;

def FST_h = if FST_UseHighLow then high else close;
def FST_l = if FST_UseHighLow then low else close;
def FST_minL = Lowest(FST_l, FST_Length);
def FST_maxH = Highest(FST_h, FST_Length);

def FST_hh = if FST_h > FST_maxH[1] then FST_h else FST_hh[1];
def FST_ll = if FST_l < FST_minL[1] then FST_l else FST_ll[1];
def FST_trend = if FST_h > FST_maxH[1] then 1 else if FST_l < FST_minL[1] then -1 else FST_trend[1];
def FST_Direction = if BarNumber() == 0 then 0
                    else if FST_trend != 1 then -1
                    else if FST_trend == 1 then 1
                    else FST_Direction[1];

### Strategy

input BullBear_Include_FST = yes;       #hint BullBear_Include_FST: Include Fibonacci SuperTrend in the vertical line strategy
input BullBear_Include_RSI_IFT = yes;   #hint BullBear_Include_RSI_IFT: Include RSI IFT in the vertical line strategy

def BullBear_Buy = (!BullBear_Include_FST or FST_Direction == 1) and
                   (!BullBear_Include_RSI_IFT or RSI_IFT_Direction == 1);
def BullBear_Sell = (!BullBear_Include_FST or FST_Direction == -1) and
                    (!BullBear_Include_RSI_IFT or RSI_IFT_Direction == -1);

def Strategy_Buy = BullBear_Buy and MACDBB_Buy and RSM_Buy;
def Strategy_Sell = BullBear_Sell and MACDBB_Sell and RSM_Sell;

plot StrategyArrow = if Strategy_Buy and !Strategy_Buy[1] then 1
                    else if Strategy_Sell and !Strategy_Sell[1] then -1
                    else 0;

plot TrendDirection = if MACDBB_Data > MACDBB_Data[1] and MACDBB_Data >= MACDBB_Upper then 2
                    else if MACDBB_Data < MACDBB_Data[1] and MACDBB_Data >= MACDBB_Upper then 1
                    else if MACDBB_Data < MACDBB_Data[1] and MACDBB_Data <= MACDBB_Lower then -2
                    else if MACDBB_Data > MACDBB_Data[1] and MACDBB_Data <= MACDBB_Lower then -1
                    else 0;

plot InSqueeze = SQZ_Squeeze;

Watchlist Column
Code: 
# B4 Watchlist Column
#
# Free for use for non commercial. Header credits must be included when any form of the code included in this package is used.
# User assumes all risk. Author not responsible for errors or use of tool.
# Copyright (c) 2021 B4 Signals
#
# Get support at: https://b4signals.com
# Join us at: https://discord.gg/kD3pKE2CQd
#
#
# v3.0 - barbros / chuck - official release

### MACDBB

input MACDBB_FastLength = 12;
input MACDBB_SlowLength = 26;
input MACDBB_BandLength = 15;
input MACDBB_NumDev = 1.0;

def MACDBB_Data = MACD(fastLength = MACDBB_FastLength, slowLength = MACDBB_SlowLength, MACDLength = 5);
def MACDBB_Upper = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
                                             Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).UpperBand;;
def MACDBB_Lower = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
                                             Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).Lowerband;
def MACDBB_Buy = MACDBB_Data > MACDBB_Upper;
def MACDBB_Sell = MACDBB_Data <= MACDBB_Lower;

### RSI/STOCASTIC/MACD CONFLUENCE COMBO

def RSM_MACD_Diff = reference MACD(fastLength = 12, slowLength = 26, MACDLength = 9).Diff;
def RSM_MACD_ZeroLine = 0;
def RSM_RSI = reference RSI(length = 7).RSI;
def RSM_Stoch_Val = 100 * (close - lowest(low, 14)) / (highest(high, 14) - lowest(low, 14));
def RSM_StochSlowK = SimpleMovingAvg(SimpleMovingAvg(RSM_Stoch_Val,3),3);

def RSM_rsiGreen = RSM_RSI >= 50;
def RSM_rsiRed = RSM_RSI < 50;
def RSM_stochGreen = RSM_StochSlowK >= 50;
def RSM_stochRed = RSM_StochSlowK < 50;
def RSM_macdGreen = RSM_MACD_Diff >= 0;
def RSM_macdRed = RSM_MACD_Diff < 0;
def RSM_Buy = RSM_rsiGreen and RSM_stochGreen and RSM_macdGreen;
def RSM_Sell = RSM_rsiRed and RSM_stochRed and RSM_macdRed;

### RSI IFT

def RSI_IFT_R = reference RSI(5, close) - 50;
def RSI_IFT_AvgRSI = MovingAverage(AverageType.Exponential,RSI_IFT_R,9);
def RSI_IFT_InverseRSI = (Power(Double.E, 2 * RSI_IFT_AvgRSI) - 1) / (Power(Double.E, 2 * RSI_IFT_AvgRSI) + 1);
def RSI_IFT_Direction = if BarNumber() == 0 then 0
                        else if (RSI_IFT_InverseRSI[1] > 0) and (RSI_IFT_InverseRSI < 0) then -1
                        else if (RSI_IFT_InverseRSI > 0) and (RSI_IFT_InverseRSI[1] < 0) then 1
                        else RSI_IFT_Direction[1];

### Fibonacci SuperTrend

input FST_Length = 11;
input FST_Retrace = 23.6;
input FST_UseHighLow = yes;

def FST_h = if FST_UseHighLow then high else close;
def FST_l = if FST_UseHighLow then low else close;
def FST_minL = Lowest(FST_l, FST_Length);
def FST_maxH = Highest(FST_h, FST_Length);

def FST_hh = if FST_h > FST_maxH[1] then FST_h else FST_hh[1];
def FST_ll = if FST_l < FST_minL[1] then FST_l else FST_ll[1];
def FST_trend = if FST_h > FST_maxH[1] then 1 else if FST_l < FST_minL[1] then -1 else FST_trend[1];
def FST_Direction = if BarNumber() == 0 then 0
                    else if FST_trend != 1 then -1
                    else if FST_trend == 1 then 1
                    else FST_Direction[1];

### Strategy

input BullBear_Include_FST = yes;       #hint BullBear_Include_FST: Include Fibonacci SuperTrend in the vertical line strategy
input BullBear_Include_RSI_IFT = yes;   #hint BullBear_Include_RSI_IFT: Include RSI IFT in the vertical line strategy

def BullBear_Buy = (!BullBear_Include_FST or FST_Direction == 1) and
                   (!BullBear_Include_RSI_IFT or RSI_IFT_Direction == 1);
def BullBear_Sell = (!BullBear_Include_FST or FST_Direction == -1) and
                    (!BullBear_Include_RSI_IFT or RSI_IFT_Direction == -1);

def Strategy_Buy = BullBear_Buy and MACDBB_Buy and RSM_Buy;
def Strategy_Sell = BullBear_Sell and MACDBB_Sell and RSM_Sell;


AssignBackgroundColor(
    if Strategy_Buy and !Strategy_Buy[1] then Color.GREEN
    else if Strategy_Sell and !Strategy_Sell[1] then Color.RED
    else color.CURRENT
);

AddLabel(yes,
    if Strategy_Buy and !Strategy_Buy[1] then "Buy"
    else if Strategy_Sell and !Strategy_Sell[1] then "Sell"
    else if Strategy_Buy then "Long"
    else if Strategy_Sell then "Short"
    else "Neutral",

    if Strategy_Buy and !Strategy_Buy[1] then Color.BLACK
    else if Strategy_Sell and !Strategy_Sell[1] then Color.WHITE
    else if Strategy_Buy then Color.LIGHT_GREEN
    else if Strategy_Sell then Color.LIGHT_RED
    else Color.CURRENT
);

Watchlist Column for Squeeze
Code: 
# B4 Watchlist Column for Squeeze
#
# Free for use for non commercial. Header credits must be included when any form of the code included in this package is used.
# User assumes all risk. Author not responsible for errors or use of tool.
# Copyright (c) 2021 B4 Signals
#
# Get support at: https://b4signals.com
# Join us at: https://discord.gg/kD3pKE2CQd
#
#
# v1.0 - barbros / chuck - official release
# v1.1 - barbros         - new squeeze logic
# v1.2 - barbros         - fix for NaN

def MACDBB_FastLength = 12;
def MACDBB_SlowLength = 26;
def MACDBB_BandLength = 15;
def MACDBB_NumDev = 1.0;
def SQZ_SqueezeLength = 30;

def MACDBB_Data = MACD(fastLength = MACDBB_FastLength, slowLength = MACDBB_SlowLength, MACDLength = 5);
def MACDBB_Upper = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
                                             Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).UpperBand;
def MACDBB_Lower = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
                                             Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).Lowerband;

def SQZ_Bandwidth = MACDBB_Upper - MACDBB_Lower;
def SQZ_Squeeze_Low = Lowest(SQZ_Bandwidth, SQZ_SqueezeLength);
def SQZ_Squeeze = SQZ_Bandwidth == SQZ_Squeeze_Low;

AddLabel(yes, if SQZ_Squeeze then "SQZ" else " ", if SQZ_Squeeze then Color.WHITE else Color.CURRENT);


-----------------------------------------------------------------------------------------------------------------------------------------------------------------

B4 CoPilot

Learn about B4 CoPilot by registering for a free webinar at the link below and receive a discount coupon.
 

Attachments

  • NT8_B4Indicator_v1_0_0.zip
    223.4 KB · Views: 3
Last edited by a moderator:
K

k marty

New member
Hi chuck. i down loaded the script for the b4 indicator. when it loaded it did not loo like it should. the labels are there, i have price labels no cloud or any vertical movement ? went into settings and changed some things but nothing. every thing is on the center line. also i checked and unchecked fit studys, nothing. any suggestions. thanks
 
barbaros

barbaros

Administrator
Staff member
k marty said:
Hi chuck. i down loaded the script for the b4 indicator. when it loaded it did not loo like it should. the labels are there, i have price labels no cloud or any vertical movement ? went into settings and changed some things but nothing. every thing is on the center line. also i checked and unchecked fit studys, nothing. any suggestions. thanks
Click to expand...
Can you post a screenshot?
 
K

k marty

New member
I leaving for work can you give directions on how to do that, never done it. i will try to do that when i return. Wont be until 6 pm pst.
 
barbaros

barbaros

Administrator
Staff member
k marty said:
I leaving for work can you give directions on how to do that, never done it. i will try to do that when i return. Wont be until 6 pm pst.
Click to expand...
You can take a screenshot with a tool from your operating system, upload to imgur.com and then use the image URL in your reply. There is an image button on the reply toolbar.
 
barbaros

barbaros

Administrator
Staff member
It seems like you put 2 indicators in the same lower row. B4 Should be in it's own lower row.
 
K

k marty

New member
I have only one indicator in the lower row. The sqz and rsm clouds were off i turned them on. When i first copied the script i got an invalid script. i did it again with out the b4 header. Started at declare lower. Every thing seemed fine. Has anyone else had an issue? really want to see how it works.
 
barbaros

barbaros

Administrator
Staff member
k marty said:
I have only one indicator in the lower row. The sqz and rsm clouds were off i turned them on. When i first copied the script i got an invalid script. i did it again with out the b4 header. Started at declare lower. Every thing seemed fine. Has anyone else had an issue? really want to see how it works.
Click to expand...
There is a line plotted at 151. This is not part of the indicator. Could you have may be copied extra lines of script code into it by any chance?
 
K

k marty

New member
What is 151? I will delete and recopy the script again tonite and see. Can you send me a screen shot of the study settings?
 
K

k marty

New member
I deleted the indicator. copy and pasted it 2 times still the same. do you have the script to seei f that might work. just frustrating.
 
barbaros

barbaros

Administrator
Staff member
k marty said:
I deleted the indicator. copy and pasted it 2 times still the same. do you have the script to seei f that might work. just frustrating.
Click to expand...
I tried it from scratch and it works as expected. Can you post your studies window image?

kOyROBk.png
 
K

k marty

New member
I will do some work on that this weekend. And try to send the study screen. can we try the script, and see if that works?
 
barbaros

barbaros

Administrator
Staff member
atuteja said:
Is there a way to add the support 1/2 and resistance 1/2 like on tv on Tos platform? Thanks!
Click to expand...
Can you clarify? I do not think what you are referring to is part of the B4 Indicator, but part of another indicator by B4.
 
W

workingprogrammer

New member
very promising indicator - thank you for the work and sharing. I am mostly doing stocks swing trading and looking to understand what is the best setting for a move that lasts 3-5 days. I usually use 1hr, 2 hr, 4 hr and day views to find trends but looking to learn from experts.
@barbaros @Chuck
 
You must log in or register to reply here.
Top